Description
Termofol TF-HM-150-60 heating mat for 6 m²
This electric heating mat consists of heating cable on fibreglass mesh. TF-HM-150-60 covers a heated area of 6 m² and has a total output of 900 W. It is designed to be incorporated into a suitable floor construction. For example, it can heat a defined floor area in a toilet, bathroom, kitchen, hallway, bedroom or office where the chosen construction and installation are approved for that use.
Model data from the catalogue
The 2025 catalogue lists TF-HM-150-60 as 0.5 × 12 m, 6 m², 150 W/m², 900 W total and 230 V. Cable diameter is 3.6 mm. This is not the complete build-up height: the substrate, adhesive or levelling layer and floor finish must also be considered. When ordering, check whether you are selecting a separate mat or a kit and which thermostat, floor sensor and connection components are included.
Determine output and heated area
Select the mat using a layout plan and the actual area available for heating. The total room area is not automatically the area to cover with matting. Whether the installation can provide primary heating depends on heat loss, insulation, floor limits and coverage. An output of 150 W/m² does not establish a fixed warm-up time or guarantee energy savings. Consumption depends on heat demand, controls and operating time.
Floor construction, controls and installation
Have the substrate, tile adhesive or levelling compound and floor finish checked for compatibility with this system. This also applies to natural stone, cast flooring and other finishes: a floor category is not blanket approval. For bathrooms and shower rooms, placement, protection and the complete electrical connection must also be assessed. Follow the model instructions for the layout, cable handling, clearances and embedding.
Use suitable controls with the floor sensor and temperature limit required for the floor construction. Have a competent installer complete and check the electrical connection. With several mats, total load, switching capacity and the circuit must be assessed together. Start operation only after the required measurements and drying and curing periods. Then follow the inspection and maintenance instructions.
Advice for your project
We help private and business end users, installers and wholesalers choose the size, controls and components. Send dimensions, a floor plan, insulation details and the intended finish. We will agree the layout, scope of supply, availability and terms with you. Delivery is free for orders from €150 within the Netherlands and Belgium.