Description
Termofol 1000-watt ceramic infrared panel with Wi-Fi
This ceramic panel has a stated output of 1000 watts and Wi-Fi controls. We help assess its suitability for a workspace, an additional heating zone or a room with known heat loss. Its output does not establish a fixed number of square metres it can heat. The panel dimensions are 120 × 60 × 1.8 cm.
Ceramic finish and stored heat
The catalogue describes a ceramic-stone finish. A warm panel can keep releasing heat after switching off: that heat was previously produced using electricity and is not additional free energy. Heat storage also does not prove a fixed percentage difference in required power between ceramic and metal. Assess the exact version and the room’s heat demand.
Comfort and electricity use
The panel gives off both radiant and convective heat. Position, furniture and distance to the occupied area affect comfort. Wi-Fi controls can help match heating to your use, but do not guarantee lower consumption. Compare all heating energy used at equivalent comfort.
| Model | TF-CS 1000/02 |
|---|---|
| Output | 1000 W |
| Supply | 230 V;50–60 Hz |
| Dimensions(l/w/d) | 1200×600×18 mm |
| Weight | 25 kg |
| Controls | Thermostat and Wi-Fi |
| Protection rating in catalogue | IP33 |
Mounting, connection and Wi-Fi
Before ordering, confirm which mounting positions and fixings are approved for the exact version. Assess support, clearances and the complete electrical connection. Have the required protection assessed from the exact model, moisture exposure and complete installation.
Check which app, network requirements and functions apply to this version. The manual should also establish offline operation, behaviour after power cuts and compatibility with other thermostats or home automation. A Wi-Fi module does not make every external control suitable.
Use, maintenance and advice
Maintain the specified clearances and prevent touching or covering hot surfaces. Follow the manual for cleaning and checks of fixings, cable and controls. We advise private and business end users, installers and wholesalers on selection and positioning. Send photos, dimensions, insulation details and intended use for a suitable proposal. We confirm availability and supply scope for the chosen version.