Is your home suitable for infrared heating? That depends on the goal. A panel providing extra warmth at a desk requires a different assessment from replacing the main heating. This checklist helps gather the necessary information; an energy rating or single calculation does not give a final answer.
Key points
Check heat demand, possible mounting positions, electrical capacity and costs. Assess these alongside how each room is used. A technically possible installation is not automatically the most economical heating choice.
Step 1: define the heating task
Record desired temperature, usage times and existing heating for each room. A panel releases heat through radiation and convection. For local warmth, radiation must reach the user; for main heating, total output must cover room heat loss. Also allow for domestic hot water if removing the boiler.
Step 2: assess the building fabric
Gather information on walls, roof, floor, glazing and ventilation. For main heating, have room heat loss assessed. There is no universal rule that every home must have a particular glazing grade, but poor insulation can greatly increase demand and costs. Thermal mass can store heat but does not prevent outdoor losses and is not an exclusive benefit of infrared.
Step 3: have electrical capacity checked
Include planned heating and other simultaneous loads such as cooking, water heating and charging. Have the supply, circuits, wiring, protection and thermostat load assessed. A three-phase supply is not automatically necessary or sufficient. A standard cable type or conductor size cannot be prescribed for every home without design. An ordinary thermostat does not automatically manage maximum loads across appliances.
Step 4: check the room and mounting
Check furniture, curtains and circulation routes and whether specified clearances can be met. Ceiling mounting is not always better or permitted for every model. In bathrooms, model, zone, IP protection and connection must be suitable together. High spaces and workshops require a separate coverage assessment. Allow for hot surfaces; heating does not treat allergies, damp or mould.
Step 5: decide on the complete plan
Compare investment, controls, expected consumption and maintenance with alternatives at equal comfort. Identify missing information and agree who handles calculation, mounting and connection. We advise private and business end users, installers and wholesalers on product selection using photos, a floor plan and usage details.
No yes-or-no answer without the facts
The outcome may be local supplementary heat, a combination with existing heating or another system. Technical suitability is not a promise of lower costs, a better energy rating or a fixed lifespan.
View the available versions · Discuss your heating plan
Frequently asked questions
Can a panel work alongside my central heating? This may be possible with suitable appliances and controls. Coordinate use and settings and compare total energy costs; lower gas use alone does not prove savings when extra electricity is consumed.
Must an older house be completely renovated first? Not for every supplementary heating task. For main heating, heat loss, comfort and costs need careful assessment. Discuss insulation and heating as connected choices.