Want to buy infrared heating for a home, office or workstation? Start with the intended application, then compare the complete system: appliance, mounting, controls, electrical connection and running costs. A low purchase price or high wattage alone does not tell you whether the solution suits your space.
Look beyond the product name
Ask which heating element, heat output and controls the specific version has. Compare power draw, dimensions, weight and permitted mounting. A robust housing or the word radiator does not demonstrate greater coverage, lower consumption or longer service life.
Buying infrared heating for your intended use
A warm appliance can radiate heat to people and surfaces and heat air through convection. That balance differs between versions. An ordinary radiator also radiates heat. An infrared radiator therefore does not eliminate air movement, and a flat panel is not automatically technically equivalent to every other appliance bearing that name.
Compare purchase, installation, controls and running costs for the same heat demand. Direct electric resistance heating and a heat pump are technically different systems: a heat pump moves environmental heat. Solar panels can provide electricity, but generation and heat demand do not always coincide. Electric heating is therefore not automatically free of cost or emissions.
Establish whether you need local supplementary heating or whole-room heating. For an entire home, also include the other rooms, ventilation, electrical capacity and hot water provision. A favourable energy rating or the absence of gas at the appliance does not itself prove that the complete plan is the best choice.
Which infrared heating suits your space?
For metal and glass, compare product data, finish and mounting approval. A material name or European origin is not a general guarantee of safety, service life or scratch resistance. Nor does a visibly dark colour prove higher radiant efficiency. This depends on the properties of the specific surface and version.
Ask how radiant performance was determined if a supplier quotes efficiency or a radiant share. Electrical power draw, total heat output and radiant share are different figures. Rear insulation and a lukewarm back do not, without comparable measurement, prove that a 400-watt panel meets the same heat demand as a 600-watt appliance.
Check which product documentation and statutory conformity information apply to the complete combination. A certification mark, CE marking or mention of ecodesign does not prove fixed savings in your living room. Have the supplier specify the controls required for the model and which functions are actually included.
Choose a version for the actual room
A seating area, workstation, bathroom and industrial hall do not require the same version. Assess coverage and obstacles for local warmth. In a bathroom, model approval, mounting position and electrical protection must be suitable together; an IP code alone is insufficient. An industrial environment also requires consideration of dust, vapours, accessibility and any special requirements.
Metal, glass, mirror, printing and RAL colours are options for individual models, not universal product characteristics. Check whether wall or ceiling mounting is permitted. A mirror that helps reduce condensation is not necessarily sized to heat the whole room. Consider options for bathroom heating alongside the mounting position.
A heated mirror can combine a mirror with a heat source. Check whether the product is intended for space heating or merely demisting a mirror; these are not the same function. Output, dimensions, connection and any lighting or controls differ between versions.
Radiant warmth can contribute to comfort, but does not guarantee dust-free air, balanced humidity or treatment for allergies and asthma. Ventilation and cleaning remain necessary. Warmer surfaces can reduce condensation; persistent moisture problems also require investigation of the cause. Fixed savings or a lower thermostat setting cannot be promised for every room.
Prepare an installation plan for output and controls
Have heat loss, insulation, windows, external surfaces, ventilation and desired temperature taken into account. A fixed wattage per square or cubic metre is not a complete calculation. More output does not automatically mean less consumption. The number of appliances follows from required heat delivery and possible mounting locations, not a standard two or three radiators per living room.
Check the substrate, load-bearing capacity, fixings and clearances against the manual. Ceiling mounting is not always the best choice. Have supply, protection and combined electrical load assessed by a qualified installer. An existing plug or wireless thermostat does not make every connection or location suitable.
Choose a compatible thermostat, receiver and sensor position. Features such as Wi-Fi, open-window detection or energy measurement vary between combinations. Follow the cleaning and inspection manual and keep connections accessible where necessary. Low-maintenance does not rule out faults, wear or component replacement.
A thermostat usually measures a temperature at its sensor and uses this to switch or control the system. This is not automatically control of the panel’s surface temperature. Check the panel, thermostat and receiver manuals together; terms such as smart or modulating are insufficient without compatibility details.
We help you choose a complete heating package
We supply private and business end users as well as installation companies and wholesalers. Share dimensions, photos or a floor plan, insulation and usage times. Mention existing heating and mounting and control preferences. We discuss suitable combinations for your building or customer project and identify which technical details are still needed.
Compare our range according to the version you need. Ask for product codes, quantities, thermostats, receivers, fixings and any installation work to be itemised. Check availability, warranty conditions and who handles electrical installation. For installation companies and wholesalers, we can discuss the technical combination and project supply.
Check costs and conditions before buying
Is infrared always cheaper than gas?
No. Compare total costs for the same use and comfort, using your own energy tariffs and the efficiency of the existing system. Local supplementary heating may work out differently from whole-room heating. A lower gas bill can accompany a higher electricity bill; assess both.
A tax scheme may be relevant to a business investment, but not every infrared heater or application qualifies. Check current RVO conditions, the applicable Energy List and application deadline before counting on a benefit. We do not promise a subsidy or tax deduction based solely on the product name.
Frequently asked questions when buying
How much electricity does a panel use?
A 600-watt panel operating continuously at full output for one hour uses approximately 0.6 kWh. Multiply actual consumption by your total electricity tariff. This is a calculation example, not a prediction of daily heating time.
Can the exterior become hot?
Yes. Surface temperatures vary between versions and can pose a contact risk. Choose a permitted mounting position with attention to children, pets and other vulnerable users. A temperature limiter does not automatically make touching safe. Do not cover the appliance unless expressly permitted.
Does every appliance last more than twenty years?
That cannot be promised generally. Service life depends on the product, environment and use and is not the same as warranty. Check conditions separately for the heating element, finish, controls and accessories.