An infrared panel with an image combines a heat source with a chosen wall image. A personal photo, artwork or business image can suit the interior. First choose a technically suitable panel, then check whether the desired printing is available for that version.
First ensure suitable heating, then choose the finish
Determine use, heat demand and possible mounting locations. Then compare permitted finishes, dimensions, weight, connection and controls. Not every panel is available in every RAL colour, with printing or for ceiling installation. Have the quotation identify the exact version and components.
Plan image and heating together
A flat panel can blend subtly into a wall or become a visible accent. It emits radiant and convective heat. Placement must reach the desired zone without prohibited obstruction by furniture or decoration. An attractive surface does not guarantee better efficiency or lower electricity use.
A warm device can radiate towards people and surfaces and heat air through convection. The proportion varies by version. Conventional radiators also radiate heat. An infrared radiator therefore does not eliminate air movement, and a flat panel is not automatically technically identical to every other device with that name.
Radiant heat can contribute to comfort but does not guarantee dust-free air, moisture balance or treatment of allergies and asthma. Ventilation and cleaning remain necessary. Warmer surfaces can limit condensation; persistent damp also requires investigating its cause. Fixed savings or lower thermostat settings cannot be promised for every room.
Check the printed version
For metal and glass, compare product data, finish and mounting approval. A material name or European origin is not a general guarantee of safety, lifespan or scratch resistance. A dark visible colour does not prove higher radiant efficiency either. That depends on the specific surface and version.
For printing, ask about image-file requirements, colour reproduction, permitted motifs and colourfastness conditions. Screen colour need not exactly match a heated product surface. Do not paint, sticker or cover a panel yourself unless the manufacturer expressly permits it.
Printing, coating or a cover layer forms part of the product design. Ask for the stated performance of the printed version. Without product specifications or comparable measurements, it cannot be promised that every print has exactly the same radiant output as every white panel. Do not add stickers, paint, frames or covers unless permitted by the manufacturer.
Choosing a suitable image file
Assess the original file’s pixel dimensions, sharpness and aspect ratio. A dpi figure alone does not show whether a photo has enough detail for the desired panel size. Requirements depend on final size, printing process and viewing distance. Confirm cropping, orientation and suitability for the product before ordering.
Choose an image you are allowed to reproduce for this application. For photos of people, also consider their permission for the intended use. Business projects may need extra coordination for colour, logos and matching panels. Ask which file formats and proof preview apply to the chosen version.
Preparing mounting, controls and cleaning
Include heat loss, insulation, windows, external surfaces, ventilation and target temperature. A fixed wattage per square or cubic metre is not a complete calculation. More power does not automatically mean less consumption. Device count follows required output and possible locations, not a standard two or three radiators per living room.
Check substrate, load capacity, fixings and clearances according to the manual. Ceiling installation is not always best. Have a competent installer assess supply, protection and combined electrical load. A plug or wireless thermostat does not make every connection or location suitable.
Choose compatible controls, receiver and sensor location. Wi-Fi, window detection or energy monitoring vary by combination. Follow manual cleaning and inspection requirements and keep connections accessible where needed. Low-maintenance does not exclude faults, wear or replacement parts.
Switch off, isolate and let the device cool before carrying out maintenance as prescribed in the manual. Do not casually touch reflectors or heating elements, or use one general cleaning method for every model. Low-maintenance can still require cleaning and inspection.
A proposal for private or business use
We supply private and business end users, installers and wholesalers. Send your plan, dimensions, insulation, use and design preferences. Include desired colour or image and mounting location. We discuss combinations that may be available and technically suitable for your space or customer project.
Specify version and conditions
Ask for the specific product’s warranty and cleaning instructions. Scratch resistance, colourfastness and lifespan cannot be promised equally for every surface. A measurement standard or environmental registration is not a general savings guarantee. Also compare installation, controls and running costs at equal comfort.
Have the proposal specify panel model, size, power, printing, controls and mounting parts. Check image approval conditions and expected custom-order lead time. Remove existing primary heating only after assessing the new combination’s required heat capacity.
Image panel FAQs
Can any image go on any panel?
No. Sizes, substrate, finish and printing process vary by product. The file and image rights must also be suitable. Ask about the chosen model rather than assuming the entire range supports printing.
Is safety glass automatically safe for children?
No. Glass type does not remove hot-surface or unsuitable-mounting risks. Check instructions, accessibility and fixings. Damaged glass requires assessment according to the manufacturer; do not use a damaged device without that assessment.