Planning a bathroom renovation in Roosdaal? Include heating before pipes, wiring, ceilings and tiling are finished. Infrared panels are one possible electric solution; suitability as primary or supplementary heating depends on heat loss, use and the chosen model.
We supply private and business end users, installation companies and wholesalers. Dimensions, insulation details and a layout help us prepare a proposal. This guide supports product selection and does not replace assessment of the electrical installation or the product manual.
Key considerations
Start with the renovation plan
Establish when you use the bathroom, the temperature you want and whether existing heating will remain. Record external walls, windows, insulation, ventilation and available electrical supply. Brief comfort after a shower differs from maintaining room temperature throughout the day.
Allow for permitted mounting and controls before closing tiled surfaces. Ceiling mounting requires an approved model, adequate structural support and specified clearances. Remove an existing radiator only after establishing that replacement heating provides the required capacity and controls.
Compare systems at the same comfort level
An infrared panel transfers heat by radiation and convection. The air also warms up. Water-filled radiators likewise emit both forms of heat; the proportion varies with device and temperature. No universal warm-up time or fixed saving applies to every bathroom.
Compare purchase, installation, controls and running costs for the same heat demand. Direct electric resistance heating and a heat pump are technically different systems: a heat pump moves ambient heat. Solar panels can supply electricity, but production and heat demand do not always coincide. Electric heating is therefore not automatically free or emission-free.
Choosing a panel, mirror or ceiling solution
A heated mirror can combine a mirror and heat source. Check whether the product is intended for room heating or only mirror demisting; these are different functions. Power, dimensions, connection method and optional lighting or controls vary by version.
A wall or ceiling panel needs an unobstructed view of the intended area, without tall cupboards or other objects blocking it. Not every wall model permits ceiling installation. Do not cover a panel with towels unless the manufacturer supplies an expressly approved accessory for that purpose.
Heating does not replace ventilation. Warmer surfaces may reduce condensation, but a panel does not remove water vapour or repair leaks or building moisture problems. Assess mould, condensation and ventilation separately. An infrared panel is not a medical treatment.
Preparing electrical installation and capacity
Belgian electrical installation rules apply in Roosdaal. Have a competent installer assess current AREI requirements, bathroom zones, protection, connections and any inspection for your renovation. An IP44 rating alone does not generally permit installation above a bath or shower. Follow the product manual too.
Determine required capacity from heat loss, desired temperature, ventilation and operating duration. A fixed figure per square or cubic metre is not a final design without this information. Distinguish heating power in watts, local radiant effect and electricity consumption in kWh.
Plan a suitable thermostat and sensor position. Not every panel has a built-in thermostat and not every separate controller suits every device. Check the complete combination, switching capacity and control behaviour in the bathroom. A timer or open-window function does not replace correct sizing.
A proposal for end users and trade partners
Send us a layout, dimensions, insulation and existing heating details, and your intended use. We can propose products with suitable controls. Installers and wholesalers can also provide project scope, quantities and technical purchasing questions. Supply, installation work and responsibilities are specified in the proposal.
Check the complete renovation package
Assess insulation, ventilation, electrical installation, controls and maintenance alongside the panel. Check warranty and origin for the specific version. Grants or subsidies depend on current conditions and your circumstances; this guide does not promise eligibility for your chosen heating.
Bathroom heating FAQs
Is a mirror panel always sufficient as primary heating?
No. Available heat output must match calculated demand and permitted placement. Mirror demisting film does not replace a designed space-heating system.
How much electricity does a panel use?
A 600-watt panel operating continuously at full power for one hour uses about 0.6 kWh. Multiply actual consumption by your total electricity tariff. This is a calculation example, not a prediction of daily operating time.